Dremel Bits for Wood and What They Do

Dremel Bits for Wood and What They Do

Let’s face it, we’ve, once upon a time, had Dremel bits for wood in our hands with no idea what we could use it for, right? Well, if you haven’t, that’s nice, if you have, then here’s a way to stop wondering what to do with it. Sometimes, you don’t even know what they look like, talk less of what they do.

There are various Dremel bits, and each of them has their uses, let’s have a look at each of them.

The first thing to know is the different categories that Dremel bits are divided into.

  • Sanding
  • Cutting
  • Carving, Etching, and Engraving
  • Grinding and Sharpening
  • Routing and Drilling
  • Cleaning and Polishing.

For the carving, etching, and engraving category, two different types of Dremel bits for wood are used. The Dremel high-speed cutters and the Dremel diamond bits.

The Dremel high-speed cutters help with the following materials;

  • Polymer clay
  • Linoleum
  • Book board
  • Wood, etc.

Dremel diamond bits, on the other hand, help with the following;

  • Book board
  • Ceramic tiles
  • Steel
  • Mirrors
  • Glass
  • Aluminum, etc.

For sanding, you make use of two different parts – the band (sheets of sandpaper) and the drum. The Dremel bits for sanding wood could be one of the two. Make your pick and have a good sanding down with it.

Each Dremel bits has a specific function and purpose; here are the common and popular uses.

If you’re looking for a Dremel bit to help cut those woods, then you need to use a carbide cutting wheel as this helps cut cleanly and quickly through sturdy pieces of wood.

If you’re looking for a Dremel bit to help you work, drill, and carve the woods, then you need to use carbide bits or the hardened high-speed steel bits. The carbide bits are the best for cutting woods as they are more durable, lasts longer, and helps when you have bulk cuttings to do or precise cuttings to make.

For metal works, it is preferable to go for a Dremel metal cutting wheel tool bit. Try the ones with an abrasive cutting wheel made from fiberglass or aluminum oxide. When engraving metal, make use of carbide bits for soft metals such as brass or aluminum and carbide burrs for hard metals.

For glass cutting, stick to Dremel diamond-tipped bits to do the trick. Glass is not only brittle, but it’s also hard, so diamond-tipped bits help cut it cleanly and swiftly. Depending on the cut, you need to make, pick the desired diamond-tipped bits, and get cutting.

For stone carving, make use of diamond-tipped Dremel bits as well. A diamond-tipped burr bit will carve into stone and marbles, although it may take a bit more time to carve marbles than it would be to carve soft stones like soapstone and sandstone. Hard rocks are no exception, but they may take a while to cut through. Diamond-tipped bits come in different grit sizes. From the coarse-textured 40 grits to the fine-textured 600 grains of sand.

Dremel bits are available in different; forms and perform various functions. Choose the one that best suits the occasion at hand and get working.

Leave comment

Your email address will not be published. Required fields are marked with *.